Cap Back™ Design with toe wrap construction expands the distance, forgiveness and feel benefits of the original breakthrough technology. This advanced engineering feat shifts mass from the extreme high toe of the head and repositions it in the sole to create an extremely low CG. The result is an iron that is easy to launch with a hot trajectory throughout the set.
A 450SS face has an intelligently positioned sweet spot that spans the most common impact points, delivering explosive ball speeds and consistency in all the right places.
Patented TaylorMade® technology engineered to maximize face flexibility for increased ball speed and forgiveness for mis-hits low on the face.
Located behind the face, the ECHO® Damping System uses a soft polymer blend and multiple contact points across the face to channel away harsh vibrations and create a forged-like feel at impact.
Club | Loft | Lie | Offset | Bounce | Length Men's | Length Women's | Swingweight Men's | Swingweight Women's | Hand |
4 | 18.5° | 61.5° | 5.8mm | 2.0° | 39.125” | 38.125” | D1/D0 | C2 | RH/LH |
5 | 21° | 62° | 5mm | 3.5° | 38.5” | 37.5” | D1/D0 | C2 | RH/LH |
6 | 24° | 62.5° | 4.6mm | 5.0° | 37.88” | 36.88” | D1/D0 | C2 | RH/LH |
7 | 28° | 63° | 4.1mm | 5.6° | 37.25” | 36.25” | D1/D0 | C2 | RH/LH |
8 | 32° | 63.5° | 3.4mm | 6.3° | 36.75” | 35.75” | D1/D0 | C2 | RH/LH |
9 | 37° | 64° | 2.9mm | 6.8° | 36.25” | 35.25” | D1/D0 | C2 | RH/LH |
PW | 43° | 64.5° | 2.6mm | 7.8° | 35.75” | 34.75” | D1/D0 | C2 | RH/LH |
AW | 49° | 64.5° | 2mm | 9.0° | 35.5” | 34.5” | D1/D0 | C2 | RH/LH |
SW | 54° | 64.5° | 1.5mm | 12.5° | 35.25” | 34.25” | D2/D1 | C2 | RH/LH |
Note: This is for your reference only and does not denote the content of the product.
Aerotech SteelFiber fc 90 is inspired by the bend profile of the tour-winning SteelFiber i95, and is available in both taper tip and parallel tip configurations. All taper tip models are ‘Constant Weight’ therefore each shaft within the set weighs the same, regardless of length.
Aerotech SteelFiber i95 T With more PGA Tour wins than any other golf graphite iron shaft in history, the SteelFiber i95 is the perfect transition into a lighter weight shaft which allows a player to see some good improvement in distance and vibration reduction while maintaining pinpoint accuracy and incredibly consistent distance control.
Model | Flex | Weight (g) | Torque | Kick Point |
Aerotech SteelFiber fc 90 | R, S | 95, 95 | 2.6-3.1, 2.4-2.9 | - |
Aerotech SteelFiber i95 | R, S | 85, 85 | 2.9, 2.8 | - |
Aldila Ascent 45 take our FlyDrive™ Technology and integrate it into high performance ultralight hybrids that are designed to compliment the look, feel and performance of the all new ASCENT™ Ultralight Wood shafts.
Aldila NV 45 offer unparalleled performance, in a 40” unitized iron, with a sleek black finish that is designed to complement the recently updated NV® and NVS wood shafts.
Model | Flex | Weight (g) | Torque | Kick Point |
Aldila Ascent 45 | L | 44 | 5.0 | - |
Aldila NV 45 | L | 47 | 5.9 | - |
Fujikura Air Speeder 50 unites stability and speed in an ultra-lightweight profile through Fujikura’s use of proprietary materials and construction techniques.
Fujikura Ventus Blue is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile. Maximum energy transfer from the tip section boosts the clubhead’s performance and a straight taper design enhances loading and feel.
Fujikura Ventus Red HY/IR HY The exceptionally engineered Ventus is designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots.
Model | Flex | Weight (g) | Torque | Kick Point |
Fujikura Air Speeder 50 | M, R, S | 50, 56, 56 | 4.3, 4.1, 4.0 | - |
Fujikura Ventus Blue 5 | A, R, S | 58, 58.5, 59 | 4.0, 3.7, 3.3 | - |
Fujikura Ventus Red HY/IR HY | M, R, S | 56, 66, 76 | 3.4, 3.0, 2.8 | - |
KBS C-Taper Lite incorporates proven KBS performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin. Featuring a constant taper design and proportionate increase in wall thickness, the C-TAPER LITE optimizes energy transfer for maximum distance. Independent testing results revealed 5+ yards in added distance.
KBS C-Taper T shaft maximizes energy transfer, for a crisp feel, while optimizing shaft diameters in the taper and tip areas for low trajectory and spin control. Independent testing proves the C-TAPER shaft to average 5% more distance versus the market leader as well.
KBS S Taper Chrome Engineered to provide superior feel while maintaining shot workability for players seeking a mid-launch and low to mid spin shaft.Shares the same bend profile as the KBS Tour shafts only with elongated step patterns to control spin, generating stable performance throughout the swing.
KBS S Taper Lite Chrome provides KBS signature superior feel while maintaining shot workability and tight dispersion for players seeking the ultimate tour shaft with mid/high trajectory and low/mid spin performance in a lighter weight performance frame.
KBS Tour FLT is proud to introduce the newest member of the KBS Golf Shaft Family; the KBS TOUR FLT. The KBS TOUR FLT is a Tour influenced shaft to fit the broadest range of players, from the Amateur Golfer, to a Tour Professional.Offering a lower ball flight for the 8 Iron and down clubs, and a higher ball flight for the 6 Iron and up, it accomplishes this while being longer and providing more spin, with the consistency and efficiency of more control.
KBS MAX Graphite is designed for a wide range of players seeking to MAXimize the performance of their iron shafts with trajectory, spin and distance in a consistent, lighter weight package, making it easier for you to produce performance on every shot. Switch into KBS and MAX OUT YOUR GAME.
KBS MAX MT 85 is a lightweight shaft for mid-high handicap players. It produces a high trajectory and spin rate for longer distance shots.
KBS Tour 2020 maximizes energy transfer for increased shot control. The KBS TOUR offers a smooth, responsive feel and is the preferred model by several of the best golfers in the world.
KBS Tour T progressive weight steel shafts are engineered with ‘moment of inertia’ analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.
KBS Tour Lite
Model | Flex | Weight (g) | Torque | Kick Point |
KBS C-Taper Lite | R, S, X | 105, 110, 115 | -, Low, Low | -, Mid, Mid |
KBS C-Taper T | S, X | 120, 130 | 2.0-1.8 | Low, Low |
KBS S Taper Chrome | S, X | 120, 130 | - | - |
KBS S Taper Lite Chrome | R, S | 95, 100 | - | - |
KBS Tour FLT | R, S, X | 110, 120, 130 | Low, Low, Low | Mid-High, Variable, Variable |
KBS MAX Graphite | A, R, S, L | 55, 65, 85, 45 | 4.5, 4.0, 3.0, 5.0 | - |
KBS MAX MT 85 | R, S | 102, 102 | - | - |
KBS Tour 2020 | S | 120 | Low | - |
KBS Tour Lite | R, S | 95, 100 | 2.5, 2.3 | - |
Mitsubishi MMT Utilizes a breakthrough Metal Mesh material which is made from individually braded strands of 304 Stainless Steel that is integrated into the shaft’s prepreg layers toward the tip, MMT™ (Metal Mesh Technology) improves density and stability, while also allowing for thinner overall composite wall construction, yielding a finely tuned, highly responsive shaft.
Model | Flex | Weight (g) | Torque | Kick Point |
Mitsubishi MMT | A, R, S | 62, 73, 86 | 5.9, 5.1, 3.7 | - |
Project X IO increases in flex, it gets 5g heavier and is geometrically modified to launch lower–providing an individually optimized shaft for each flex.
Project X LS is the next evolution of the original Project X. It features an ultra-stable and stiff design that minimizes spin while providing a tight feel to keep up with even the strongest swingers on Tour.
Project X LZ incorporates Loading Zone technology by adding a series of small steps below the grip section of the classic tapered PX profile. This slightly softens the midsection and helps raise the trajectory slightly. The result is a stable, low/mid launching shaft with smooth feel.
Project X T deliver penetrating trajectory and ball flight and strike the perfect balance of unrivaled distance, stability and control for golf’s most serious players.
Model | Flex | Weight (g) | Torque | Kick Point |
Project X IO | 5.5, 60 | 105, 110 | - | - |
Project X LS | 6.0, 6.5 | 120, 125 | - | - |
Project X LZ | 5.5, 6.0, 6.5 | 115, 120, 125 | 2.0° - 1.7° | - |
Project X T | 5.5, 6.0, 6.5 | 115, 120, 125 | 1.8° - 1.6° | - |
TT Dynamic Gold 105 VSS Engineered to be easier to swing, delivering the control and accuracy expected from the Dynamic Gold brand while adding distance from the increased club head speed produced by the lighter overall weight.
TT Dynamic Gold 120 shaft delivers the tour-caliber accuracy of Dynamic Gold in a lighter weight steel shaft. Stronger players will experience the exact same profile and launch as Dynamic Gold in a shaft that is easier to swing.
TT Dynamic Gold 95 VSS featuring our VSS Pro technology for enhanced feel, Dynamic Gold 95 is perfect for players looking for the softest feeling shaft while still keeping the consistency, stability and durability that comes with steel.
TT Dynamic Gold T This high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.
TT Dynamic Gold Tour Issue provide the same power, control and the trademark penetrating ball flight associated with the entire series of Dynamic Gold irons shafts. The Tour Issue steel shafts have a Tour Only weight tolerance for custom precision fitting. The Dynamic Gold Tour Issue golf shafts are available in sets of eight (3-PW) and in S400 and X100 flexes, .355 only.
TT Elevate 95 VSS is a lightweight, high launching and spinning shaft that is designed to combat the "low spin" industry trend by increasing initial launch/spin to maximize carry distances and creating optimal land angles to hold more green.
Model | Flex | Weight (g) | Torque | Kick Point |
TT Dynamic Gold 105 VSS | R300, S300, X100 | 105, 107, 109 | - | - |
TT Dynamic Gold 120 | S300, X100 | 116, 118 | - | - |
TT Dynamic Gold 95 VSS | R300 | 95 | - | - |
TT Dynamic Gold T | S300, X100 | 103, 105 | - | - |
TT Dynamic Gold Tour Issue | S400, X100 | 132, 130 | - | - |
TT Elevate 95 VSS | R, S | 93, 94 | - | - |
UST Recoil 450 ESX T iron shafts are an evolution of the Recoil 450/460 ES models. Recoil ESX are designed to provide maximum distance and control for all golfers through the latest in design and materials.
UST Recoil 460 ESX T Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.
UST Recoil 760 SmacWrap Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.
UST Recoil 780 SmacWrap iron shafts are an evolution of the Recoil 760/780 ES models. These iron shafts are designed to provide maximum control and distance for all golfers through the latest in design and materials.
UST Recoil DART designed after years of research, testing and development to precisely optimize shaft hoop stiffness in the critical areas of the golf shaft. To achieve maximum distance, optimum hoop stiffness is designed into the energy transfer section of the shaft. In the tip. section, the hoop stiffness is increased to maintain feel while also stabilizing the tip section for maximum consistency and optimum ball flight.
Model | Flex | Weight (g) | Torque | Kick Point |
UST Recoil 450 ESX T | L | 52 | 4.2 | - |
UST Recoil 460 ESX T | A, R, S | 59, 64, 67 | 4.8, 4.7, 4.6 | - |
UST Recoil 760 SmacWrap | A, R | 67, 69 | 4.1, 4.1 | - |
UST Recoil 780 SmacWrap | S | 86 | 3.5 | - |
UST Recoil DART | A, R, S | - |
Model | Image |
Golf Pride CP2 Pro | |
Golf Pride CP2 Wrap | |
Golf Pride MCC 4 Align Black/Grey | |
Golf Pride MCC 4 Grey/Blk | |
Golf Pride MCC Align Black/White | |
Golf Pride MCC Plus 4 | |
Golf Pride MCC Plus4 Grey/Red | |
Golf Pride New Decade Red-Black | |
Golf Pride New Decade White Black | |
Golf Pride Tour Velvet 360 Grey/Black | |
Golf Pride Tour Velvet Reminder | |
Golf Pride Tour Velvet | |
Golf Pride Tour Wrap 2G Black | |
Golf Pride Tour Wrap 2G White | |
Golf Pride Z Grip 360 Grey/Black | |
Golf Pride Z Grip Black-White | |
Golf Pride Z Grip Green | |
Golf Pride Z Grip Light Blue | |
Golf Pride Z Grip Orange | |
Golf Pride Z Grip Red | |
Golf Pride Z Grip Royal Blue | |
Golf Pride Z Grip Silver | |
Golf Pride Z Grip Yellow | |
Golf Pride ZGrip Blk/Gry.600(SIM Dr/Fwy) |
Model | Image |
Iomic Sticky 2.3 Black | |
Iomic Sticky 2.3 Blue/Black |
Model | Image |
Lamkin CrossBlk/Gry.600Rem(SIMIr/Res) | |
Lamkin Crossline | |
Lamkin Crossline 360 Black/Grey | |
Lamkin Crossline Black/Red | |
Lamkin Crossline Black/Blue GEC (MG3) | |
Lamkin Crossline Black/Red .600 Rem | |
Lamkin Crossline | |
Lamkin Crossline TM | |
Lamkin Dual Feel Ladies | |
Lamkin GENESIS Crossline Cord | |
Lamkin SONAR Plus | |
Lamkin Sonar Wms Grey/White.580(SIM) | |
Lamkin SONAR Wrap | |
Lamkin ST Hybrid Mid | |
Lamkin ST Hybrid Std | |
Lamkin ST Hybrid with Calibrate Mid | |
Lamkin ST Hybrid with Calibrate Std |
Model | Image |
SuperStroke Cross Comfort | |
SuperStroke Traxion Tour |
Model | Image |
TaylorMade 360 Jr .590 Red | |
TaylorMade Tour Velvet TM Logo |
Model | Image |
Winn DriTac 2.0 Ladies Black | |
Winn DriTac 2.0 Midsize Black | |
Winn DriTac 2.0 Oversize Black | |
Winn DriTac 2.0 Standard Black | |
Winn DriTac Wrap Grey | |
Winn DriTac Black-Blue | |
Winn DriTac Black-Red |
Construction | Iron Back | MSRP |
Forged | Muscle Back | $142.85 |