The wide sweet spot and the high initial ball speed reduce mis-hit
The multi-material structure that use a carbon crown and a stainless steel sole with a titanium frame.
The surplus weight put on the sole, and the strong trajectory is obtained by lowering the center of gravity.
The wide sweet spot resists mishit.
High repulsion performance and high initial velocity by the deflection repulsion at impact.
Provide the effective by widening the slot even in the low head speed.
The wide slot that extend to the toe generates repulsion for more speed, keeps the initial speed even in a miss hit.
The increased repulsion coupled with an expanded repulsion area on the face boost ball speed.
The radial face minimise power loss and deliver high initial velocity; even on off-centre hits and especially at the bottom of the face.
The increased repulsion coupled with an expanded repulsion area on the face boost ball speed.
The radial face minimize power loss and deliver high initial velocity; even on off-centre hits and especially at the bottom of the face.
| No. /Loft(deg) | Head Material | Head Volume (cm) | Lie Angle (deg) | Length(inch) | Swing Weight/Total Weight (g) | ||||
| - | - | - | - | - | VIZARD FOR NX 45 | R | SR | S | |
| Ti3W / 15 | Carbon Crown+Ti6-4 Body＋Ti6-4 Face＋SUS630 Sole(Casting) | 194 | 57.5 | 43.0 | - | D1/ approx. 297 | D1/ approx. 299 | D1.5/ approx. 301 | |
| Ti5W / 18 | 179 | 58.0 | 42.5 | - | D1/ approx. 301 | D1/ approx. 303 | D1.5/ approx. 305 | ||
This is for your reference only and does not denote the content of the product.
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diamater(mm) | Butt Diamter(mm) | Kick Point |
| VIZARD FOR NX 45 | R | 1,150 | 45.5 | 5.90 | 8.6 | 15.0 | MID-LOW |
| SR | 47.0 | 5.80 | 15.1 | ||||
| S | 48.5 | 5.70 |
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diamater(mm) | Butt Diamter(mm) | Kick Point | |
| VIZARD MA | 4 | R | 1,150 | 46.0 | 5.50 | 8.6 | 15.1 | MID-LOW |
| 4 | S | 49.0 | 5.40 | 15.2 | ||||
| 5 | R | 53.5 | 4.70 | 15.4 | ||||
| 5 | S | 56.5 | 4.60 | 15.5 | ||||
| 6 | SR | 63.0 | 4.00 | 15.7 | ||||
| 6 | S | 64.5 | 3.95 | 15.8 | ||||
| 6 | X | 67.5 | 3.85 | 15.9 | ||||
| 7 | S | 75.0 | 3.45 | 15.8 | ||||
| 7 | X | 78.0 | 3.35 | 15.9 | ||||
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diamater(mm) | Butt Diamter(mm) | Kick Point | ||
| VIZARD MP | 4 | R | 1,150 | 45.0 | 5.50 | 8.6 | 14.9 | MID-LOW | |
| 4 | S | 48.0 | 5.40 | 15.0 | |||||
| 5 | R | 54.0 | 4.75 | 15.2 | |||||
| 5 | S | 57.0 | 4.65 | 15.3 | |||||
| 6 | SR | 64.5 | 4.05 | 15.5 | |||||
| 6 | S | 66.0 | 4.00 | 15.6 | |||||
| 6 | X | 69.0 | 3.90 | 15.7 | |||||
| 7 | S | 76.5 | 3.50 | 15.7 | |||||
| 7 | X | 79.5 | 3.40 | 15.8 | |||||
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diamater(mm) | Butt Diamter(mm) | Kick Point | ||
| VIZARD FZ | 5 | R | 1,160 | 53.5 | 4.85 | 8.6 | 15.3 | HIGH | |
| 5 | SR | 55.0 | 4.80 | 15.3 | |||||
| 5 | S | 56.5 | 4.75 | 15.4 | |||||
| 6 | SR | 63.5 | 3.90 | 15.4 | |||||
| 6 | S | 65.0 | 3.85 | 15.5 | |||||
| 6 | X | 68.0 | 3.75 | 15.6 | |||||
| 7 | S | 71.5.0 | 3.40 | 15.5 | |||||
| 7 | X | 74.5 | 3.30 | 15.6 | |||||
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diamater(mm) | Butt Diamter(mm) | Kick Point | ||
| VIZARD PT | 40 | - | 1,150 | 47.5 | 5.20 | 8.6 | 14.9 | HIGH | |
| 40 | - | 56.0 | 3.90 | 15.1 | |||||
| 60 | - | 65.5 | 3.40 | 15.4 | |||||
| NAME | MATERIAL | WEIGHT(g) | SIZE |
| GR HONMA RUBBER 41 GD | RUBBER | 41.0 | 60 |
| Headcover | Wrench | Interchangeable Shaft | MSRP |
| Yes | No | No | $500.00 |
