Mizuno T24 Raw Wedge 2023

Description

Mizuno T24 Raw Wedge

Our craftsman’s re-work of Mizuno’s prolific T-Series wedge, with subtle top-line refinements visible from the playing position. Grain Flow Forged in Hiroshima Japan, to ensure precise shaping and an unrivalled touch around the green. Now with a higher spinning QUADCUT+ Grooves and five unique sole profiles.

DETAILS

FORGED IN HIROSHIMA JAPAN:

One-piece Grain Flow Forged HD Boron in Hiroshima, Japan - where Mizuno irons have been produced since 1968.

MODIFIED TEARDROP:

Flows through the set such that from stronger lofts with straighter lines to higher lofts with softer lines.

TAPERED BLADE DESIGN:

By tapering the upper portion of the blade, the T24 creates incremental vertical MOI for more consistent spin and more solid impact feel, particularly high impact.

WET WEATHER PERFORMANCE:

Mizuno's HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop off.

NEW QUAD CUT + GROOVES:

Optimizing 6 groove geometry parameters delivers maximized spin for both full shots and partial shots in dry and wet conditions. 15 grooves on 46-54 degree wedges (full shots) and 17 grooves on 56-60 degree wedges (helps with partial shots).

5 DISTINCTIVE GRIND OPTIONS:

S - Higher bounce, limited relief, higher effective bounce
D - Mid Bounce, moderate relief, medium effective bounce
C - Mid/high bounce, generous relief, mid/high effective bounce
V - High bounce, most aggressive relief, mid/low effective bounce
X - Low bounce, aggressive relief, lowest effective bounce

	5612-S	5610-D	5808-C	5810-V	6006-X
Grind aggressiveness	Low	Mid	Mid/High	Very High	High
Bounce level for a particular loft	High	Mid	Mid/High	High	Low
Combined effective bounce:	Highest	Mid	Mid/High	Mid/Low	Low

Mizuno T24 Raw Wedge Product Specs

Club#	Grind	Loft°	Lie	Bounce	Club length	HAND	Swing Weight
46/08	S	46	63	8	35.5"	RH	D4
48/10	S	48	63	10	35.5"	RH	D4
50/08	S	50	63	8	35.25"	RH	D5
52/10	S	52	63	10	35.25	RH	D5
54/08	D	54	63	8	35.25	RH	D5
54/10	S	54	63	10	35.25	RH	D5
56/06	C	56	63	6	35.25	RH	D5
56/08	V	56	63	8	35.25	RH	D5
56/10	D	56	63	10	35.25	RH	D5
56/12	S	56	63	12	35.25	RH	D5
58/04	X	58	63	4	35.25	RH	D5
58/08	C	58	63	8	35.25	RH	D5
58/10	V	58	63	10	35.25	RH	D5
58/12	D	58	63	12	35.25	RH	D5
60/06	X	60	63	6	35.25	RH	D5
60/10	C	60	63	10	35.25	RH	D5
60/12	V	60	63	12	35.25	RH	D5

Note: this is for your reference only and does not denote the content of the product.

TRUE TEMPER DYNAMIC GOLD TOUR ISSUE STEEL S400 - SHAFT

Flex	Weight	Trajectory
S400	132g	Low

MCC BLACK/GRAY - GRIP

Specification

Construction	Finish	MSRP
Forged	Raw	$179.99

NPIP