The premium BERES brand provides world-class quality and performance, and now collaborates with the traditional Japanese AIZU lacquer, originating in the northern part of Japan close to the Honma Sakata factory.
High repulsion performance due to the 3D L-CUP structure and sole slots improve the initial ball speed. A thicker sole design ensures the ultra-low center of gravity to deliver a high launch angle.
The inside and outside sole slots generate high repulsion, and the outside toe slot provides high repulsion performance on off center strikes at toe end.
Repulsion performance is improved by reducing the thickness of the iron face, and vertical slits reinforce the impact area to provide strength and durability, delivering forgiveness and a stable shot
By enlarging the lower part of the cavity, an increased deep low CG design is realised. By progressively changing the cavity design by loft, the ideal trajectory for each club is achieved.
As the star level increases, the stability on off-center strikes increases.
The shaft accelerates the head speed at impact in stages, by adopting different materials for each grade.
| Number/Loft (deg.) | Head Material / Process | Finish | Lie Angle (deg.) | Offset(mm) | Length(inch) | Swing Weight/Total Weight(g) | ARMRQ MX 2S | ARMRQ MX 3S | ARMRQ MX 4S | ARMRQ MX 5S | ||||
| L | A | L | A | L | A | L | A | |||||||
| #5/24 | Body: 17-4/Casting Face: #5-#9 AM355P+/Casting #10-SW ES235/Rolling | Nickel chrome plated (2-layer plated) satin finish | 61.0 | 4.0 | 37.0 | C1 / 333 | ※ | C1 / 333 | ※ | ※ | ※ | ※ | ※ | |
| #6/27 | 61.5 | 3.5 | 36.5 | C1 / 339 | ※ | C1 / 339 | ※ | C1 / 339 | ※ | C1 / 339 | ※ | |||
| #7/30 | 62.0 | 36.0 | C1 / 345 | ※ | C1 / 345 | ※ | C1 / 345 | ※ | C1 / 345 | ※ | ||||
| #8/34 | 62.5 | 3.0 | 35.5 | C1 / 351 | ※ | C1 / 351 | ※ | C1 / 351 | ※ | C1 / 351 | ※ | |||
| #9/38 | 63.0 | 35.0 | C1 / 357 | ※ | C1 / 357 | ※ | C1 / 357 | ※ | C1 / 357 | ※ | ||||
| #10/43 | 34.5 | C1 / 363 | ※ | C1 / 363 | ※ | C1 / 363 | ※ | C1 / 363 | ※ | |||||
| #11/49 | 34.0 | C1 / 369 | ※ | C1 / 369 | ※ | C1 / 369 | ※ | C1 / 369 | ※ | |||||
| SW/56 | 63.5 | 2.5 | C2 / 373 | ※ | C2 / 373 | ※ | C2 / 373 | ※ | C2 / 373 | ※ | ||||
Note: this is for your reference only and does not denote the content of the product.
The newly developed "10-axis sheet" material consists of 4-axis aluminum and 6-axis carbon material. High compression strength and by adopting "ARMOR" on the bat side, a consistent swing trajectory is realized. Furthermore, the counter balance design effect improves the swing speed. By increasing the strength of the shaft sheet, it is possible to produce accurate shots with a constant swing path.
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diameter(㎜) | Butt Diameter(㎜) | Kick-Point |
| ARMRQ MX 2S | L | 933 | 41.5 | 4.95 | 9.3 | 14.3 | Low |
| A | 933 | 43.0 | 4.90 | 9.3 | 14.3 | Low |
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diameter(㎜) | Butt Diameter(㎜) | Kick-Point |
| ARMRQ MX 2S | L | 933 | 41.5 | 4.55 | 9.3 | 14.3 | Low |
| A | 933 | 43.0 | 4.50 | 9.3 | 14.3 | Low |
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diameter(㎜) | Butt Diameter(㎜) | Kick-Point |
| ARMRQ MX 2S | L | 933 | 41.5 | 4.35 | 9.3 | 14.3 | Low-Low |
| A | 933 | 43.0 | 4.30 | 9.3 | 14.3 | Low-Low |
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diameter(㎜) | Butt Diameter(㎜) | Kick-Point |
| ARMRQ MX 2S | L | 933 | 41.5 | 4.20 | 9.3 | 14.3 | Low-Low |
| A | 933 | 43.0 | 4.15 | 9.3 | 14.3 | Low-Low |
| Model | Material | Weight (g) | Size |
| GR Honma Rubber 36 GD | Rubber | 36.0 | 59 |
| Construction | Iron Back | MSRP |
| Forged | Cavity Back | $4,950.00 |
